Change The Operating Mode; Figure 14 Tutorial: Wireless Lan: Before; Table 5 Tutorial: Example Information - ZyXEL Communications G-3000 User Manual

To configure these settings, you need to know the MAC (Media Access Control) addresses of
the devices you want to allow users of the guest network to access. The following table shows
the addresses used in this example.

Table 5 Tutorial: Example Information

Network router (A) MAC address
Network printer (B) MAC address

4.2.1 Change the Operating Mode

Log in to the ZyXEL Device (see
Wireless screen appears. In this example, the ZyXEL Device is set to Access Point operating
mode, and is currently using the SSID04 profile.

Figure 14 Tutorial: Wireless LAN: Before

Select MESSID from the Operating Mode drop-down list box. The screen displays as
follows.
G-3000 Series User's Guide
00:AA:00:AA:00:AA
AA:00:AA:00:AA:00
Section 2.2 on page 41). Click WIRELESS > Wireless. The
Chapter 4 Tutorial
55