Security: Wep; Figure 45 Security: Wep; Table 21 Security: Wep - ZyXEL Communications G-3000 User Manual

Chapter 7 Wireless Security Configuration
Table 20 Security: No-Access
LABEL
Apply
Reset

7.10.3 Security: WEP

Select WEP in the Security Mode field to display the following screen.

Figure 45 Security: WEP

The following table describes the labels in this screen.

Table 21 Security: WEP

LABEL
Name
Security Mode
WEP Encryption
Authentication
Method
ASCII
Hex
96
DESCRIPTION
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Type a name to identify this security profile. Use up to 20 ASCII characters.
Spaces are allowed.
Choose WEP in this field.
Select Disable to allow wireless stations to communicate with the access points
without any data encryption.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Select Auto, Open System or Shared Key from the drop-down list box.
The default setting is Auto.
Select this option to enter ASCII characters as the WEP keys.
Select this option to enter hexadecimal characters as the WEP keys.
The preceding "0x" is entered automatically.
G-3000 Series User's Guide