Chapter 4 Tutorial
Figure 12 Tutorial: Example MBSSID Setup
The standard network (SSID04) has access to all resources. The VoIP network (VoIP_SSID)
has access to all resources and a high Quality of Service (QoS) setting (see
83
for information on QoS). The guest network (Guest_SSID) has access to the Internet and
the network printer only, and a low QoS setting.
To configure these settings, you need to know the MAC (Media Access Control) addresses of
the devices you want to allow users of the guest network to access. The following table shows
the addresses used in this example.
Table 4 Tutorial: Example Information
Network router (A) MAC address
Network printer (B) MAC address
4.2.1 Change the Operating Mode
Log in to the ZyXEL Device (see
Wireless screen appears. In this example, the ZyXEL Device is using Access Point operating
mode, and is currently set to use the SSID04 profile.
52
00:AA:00:AA:00:AA
AA:00:AA:00:AA:00
Section 2.1 on page
41). Click WIRELESS > Wireless. The
ZyXEL NWA-3160 Series User's Guide
Chapter 6 on page