Configuring Mac Filter; Figure 62 Layer-2 Isolation Example 2 - ZyXEL Communications G-3000 User Manual

Figure 62 Layer-2 Isolation Example 2

9.3 Configuring MAC Filter

The MAC filter screen allows you to configure the ZyXEL Device to give exclusive access to
up to 32 devices (Allow Association) or exclude up to 32 devices from accessing the ZyXEL
Device (Deny Association).
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of each device to configure this
screen.
To change your ZyXEL Device's MAC filter settings, click WIRELESS > MAC Filter. The
screen appears as shown.
G-3000 Series User's Guide
Chapter 9 Other Wireless Configuration
119