Remote Management Limitations; System Timeout - ZyXEL Communications G-3000 User Manual

Chapter 26 System Maintenance and Information
Table 90 Menu 24.11 Remote Management Control
FIELD
Secured Client IP
Certificate
Authenticate Client
Certificates
Once you have filled in this menu, press [ENTER] to save your configuration, or press [ESC] to cancel.

26.3.5 Remote Management Limitations

Remote management over LAN or WAN will not work when:
1 You have disabled that service in menu 24.11.
2 The IP address in the Secured Client IP field (menu 24.11) does not match the client IP
address. If it does not match, the ZyXEL Device will disconnect the session
immediately.
3 There is already another remote management session of the same type (Telnet, FTP or
Web) running. You may only have one remote management session of the same type
running at one time.
4 There is a web remote management session running with a Telnet session. A Telnet
session will be disconnected if you begin a web session; it will not begin if there already
is a web session.

26.4 System Timeout

There is a system timeout of five minutes (300 seconds) for Telnet/web/FTP connections. Your
ZyXEL Device will automatically log you out if you do nothing in this timeout period, except
when it is continuously updating the status in menu 24.1 or when sys stdio has been
changed on the command line.
254
DESCRIPTION
The default 0.0.0.0 allows any client to use this service to remotely manage
the ZyXEL Device. Enter an IP address to restrict access to a client with a
matching IP address.
This field displays the name used to identify this certificate. The ZyXEL Device
has an automatically generated self signed certificate by default. The factory
default certificate is common to all ZyXEL Device's that use certificates. You
can replace the certificate when you log into the ZyXEL Device (see
2.2 on page 41) or you can use the Certificates configuration screen (see
Chapter 13 on page 147).
Select Yes by pressing [SPACE BAR]. The ZyXEL Device uses one of the
certificates listed in the My Certificates screen to authenticate each wireless
client. The exact certificate used depends on the certificate information
configured on the wireless client.
Section
G-3000 Series User's Guide