Table 26 Radius - ZyXEL Communications G-3000 User Manual

The following table describes the labels in this screen.

Table 26 RADIUS

LABEL
Index
Profile Name
Primary
Backup
RADIUS Option
Active
RADIUS Server IP
Address
RADIUS Server Port
Share Secret
Active
Accounting Server IP
Address
Accounting Server
Port
Share Secret
Apply
Reset
G-3000 Series User's Guide
DESCRIPTION
Select the RADIUS profile you want to configure from the drop-down list box.
Type a name for the RADIUS profile associated with the Index number above.
Use up to 32 ASCII characters. Spaces are allowed.
Configure the fields below to have user authentication and accounting through
RADIUS servers.
If the ZyXEL Device cannot communicate with the Primary RADIUS server, it
can use a Backup RADIUS server. Make sure both Active check boxes are
selected if you want to use backup servers.
The ZyXEL Device will attempt to communicate three times before using
Backup servers. Requests can be issued from the client interface to use the
backup server. The length of time for each authentication is decided by the
wireless client or based on the configuration of the ReAuthentication Timer
field in the Security screen.
This option is not available on all models.
Select Internal to use the ZyXEL Device's internal RADIUS server.
Select External to use an external RADIUS server.
Select the check box to enable user authentication using the RADIUS server
specified in this column.
Enter the IP address of the authentication server in dotted decimal notation.
You do not need to configure this field when using the ZyXEL Device's internal
RADIUS server (not available on all models).
Enter the port number of the authentication server. The default port number is
1812. You need not change this value unless your network administrator
instructs you to do so. You do not need to configure this field when using the
ZyXEL Device's internal RADIUS server (not available on all models).
Enter a password (up to 128 alphanumeric characters) as the key to be
shared between the authentication server and the ZyXEL Device. The key
must be the same on the authentication server and your ZyXEL Device. The
key is not sent over the network. You do not need to configure this field when
using the ZyXEL Device's internal RADIUS server (not available on all
models).
Select the check box to enable user accounting through the RADIUS server
specified in this column. You cannot use an accounting server when using a
ZyXEL Device's internal RADIUS server.
Enter the IP address of the accounting server in dotted decimal notation.
Enter the port number of the accounting server. The default port number is
1813. You need not change this value unless your network administrator
instructs you to do so with additional information.
Enter a password (up to 128 alphanumeric characters) as the key to be
shared between the accounting server and the ZyXEL Device. The key must
be the same on the accounting server and your ZyXEL Device. The key is not
sent over the network.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Chapter 7 Wireless Security Configuration
103