Console Port Speed; Log And Trace; Viewing Error Log; Figure 161 Menu 24.2.2 System Maintenance: Change Console Port Speed - ZyXEL Communications G-3000 User Manual

Chapter 24 System Information and Diagnosis
The following table describes the fields in this menu.

Table 83 Menu 24.2.1 System Maintenance: Information

FIELD
Name
Routing
ZyNOS F/W Version
Country Code
LAN
Ethernet Address
IP Address
IP Mask
DHCP
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

24.2.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your ZyXEL Device supports 9600 (default), 19200,
38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER]
to select the desired speed in menu 24.2.2, as shown in the following figure.

Figure 161 Menu 24.2.2 System Maintenance: Change Console Port Speed

Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you changed your ZyXEL Device's console port speed, you must also make the same
change to the console port speed parameter of your communication software.

24.3 Log and Trace

Your ZyXEL Device provides error logs and trace records that are stored locally.

24.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow
the procedures to view the local error/trace log:
1 Type 24 in the main menu to display Menu 24 – System Maintenance.
234
DESCRIPTION
Displays the system name of your ZyXEL Device. This information can be
changed in Menu 1 – General Setup.
Refers to the routing protocol used.
Refers to the ZyNOS (ZyXEL Network Operating System) system firmware
version. ZyNOS is a registered trademark of ZyXEL Communications
Corporation.
Refers to the country code of the firmware.
Refers to the Ethernet MAC (Media Access Control) of your ZyXEL Device.
This is the IP address of the ZyXEL Device in dotted decimal notation.
This shows the subnet mask of the ZyXEL Device.
This field shows the DHCP setting of the ZyXEL Device.
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
G-3000 Series User's Guide