Figure 28 Password; Table 7 Password - ZyXEL Communications G-3000 User Manual

Figure 28 Password.

The following table describes the labels in this screen.

Table 7 Password

LABEL
Enable Admin on
Local
Old Password
New Password
Retype to Confirm
Enable Admin on
RADIUS
User Name
Password
RADIUS
G-3000 Series User's Guide
DESCRIPTIONS
Select this check box to have the device authenticate management logins to
the device.
Type in your existing system password (1234 is the default password).
Type your new system password (up to 31 characters). Note that as you type
a password, the screen displays an asterisk (*) for each character you type.
Retype your new system password for confirmation.
Select this (and configure the other fields in this section) to have a RADIUS
server authenticate management logins to the ZyXEL Device.
Configuring the administrator authentication on RADIUS option automatically
configures the last wireless LAN security profile and sets it to 8021x-Only.
Enter the username for this user account. This name can be up to 31 ASCII
characters long, including spaces.
Type a password (up to 31 ASCII characters) for this user profile. Note that as
you type a password, the screen displays a (*) for each character you type.
Spaces are allowed.
Note: If you are using PEAP authentication, this password field
is limited to 14 ASCII characters in length.
Select the RADIUS server profile of the RADIUS server that is to authenticate
management logins to the ZyXEL Device.
The ZyXEL Device tests the user name and password against the RADIUS
server when you apply your settings.
• The user name and password must already be configured in the RADIUS
server.
• You must already have a RADIUS profile configured for the RADIUS
server (see Section 7.12 on page
• The server must be set to Active in the profile.
Chapter 5 System Screens
102).
69