F/W Upload Screen; Figure 122 Firmware Upload; Table 64 Channel Usage - ZyXEL Communications G-3000 User Manual

The following table describes the labels in this screen.

Table 64 Channel Usage

LABEL
SSID
MAC Address
Channel
Signal
Network Mode
Refresh

16.5 F/W Upload Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
"*.bin" extension. The upload process uses HTTP (Hypertext Transfer Protocol) and may take
up to two minutes. After a successful upload, the system will reboot. See the Firmware and
Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands.
Click MAINTENANCE > F/W Upload. Follow the instructions in this screen to upload
firmware to your ZyXEL Device.

Figure 122 Firmware Upload

G-3000 Series User's Guide
DESCRIPTION
This is the Service Set IDentification name of the AP in an Infrastructure
wireless network or wireless station in an Ad-Hoc wireless network. For our
purposes, we define an Infrastructure network as a wireless network that uses
an AP and an Ad-Hoc network (also known as Independent Basic Service Set
(IBSS)) as one that doesn't. See the
chapter for more information on basic service sets (BSS) and extended service
sets (ESS).
This field displays the MAC address of the AP in an Infrastructure wireless
network. It is randomly generated (so ignore it) in an Ad-Hoc wireless network.
This is the index number of the channel currently used by the associated AP in
an Infrastructure wireless network or wireless station in an Ad-Hoc wireless
network.
This field displays the strength of the AP's signal. If you must choose a channel
that's currently in use, choose one with low signal strength for minimum
interference.
"Network mode" in this screen refers to your wireless LAN infrastructure (refer
to the Wireless LAN chapter) and security setup.
Click Refresh to reload the screen.
Chapter 16 Maintenance
Wireless Configuration and Roaming
193