Navigating The Smt Interface; Figure 135 Menu 23.1 System Security: Change Password; Table 67 Main Menu Commands - ZyXEL Communications G-3000 User Manual

3 Type your existing system password in the Old Password field, and press [ENTER].

Figure 135 Menu 23.1 System Security: Change Password

4 Type your new system password in the New Password field (up to 30 characters), and
press [ENTER].
5 Re-type your new system password in the Retype to confirm field for confirmation and
press [ENTER].
Note that as you type a password, the screen displays an asterisk "*" for each character you
type.

17.5 Navigating the SMT Interface

You can use the SMT to configure and monitor your ZyXEL Device.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 67 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering
information
Required fields
N/A fields
G-3000 Series User's Guide
Menu 23.1 – System Security – Change Password
Old Password= ****
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
KEYSTROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE Fields beginning with "Edit" lead to hidden menus and
BAR] to change No have a default setting of No. Press [SPACE BAR] once to
to Yes then press change No to Yes, then press [ENTER] to go to the
[ENTER]. "hidden" menu.
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field.
[DOWN] arrow You can also use the [UP]/[DOWN] arrow keys to move to
keys. the previous and the next field, respectively.
Type in or press You need to fill in two types of fields. The first requires you
[SPACE BAR], then to type in the appropriate information. The second allows
press [ENTER]. you to cycle through the available choices by pressing
[SPACE BAR].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Chapter 17 Introducing the SMT
203