ZyXEL Communications G-3000 User Manual page 112

Chapter 8 MESSID and SSID
Table 30 Configuring SSID
LABEL
VLAN ID
Second RX VLAN ID
Security
RADIUS
QoS
L2 Isolation
Enable MAC Filtering
Enable Public SSID
(MESSID Only)
Apply
Reset
112
DESCRIPTION
Enter a VLAN ID number from 1 to 4094. Packets coming from the WLAN
using this SSID profile are tagged with this VLAN ID number by the ZyXEL
Device. Different SSID profiles can use the same or different VLAN IDs. This
allows you to split wireless stations into groups using similar VLAN IDs.
Enter a number from 1 to 4094, but different from the VLAN ID. Traffic
received from the LAN that is tagged with this VLAN ID is sent to all SSIDs
with this VLAN ID configured in the VLAN ID or Second Rx VLAN ID fields.
See Chapter 15 on page 173
Select a security profile to use with this SSID profile. See
page 93 for more information.
Select a RADIUS profile from the drop-down list box, if you have a RADIUS
server configured. If you do not need to use RADIUS authentication, ignore
this field. See Section 7.12 on page 102
Select the Quality of Service priority for this ESS's traffic.
• Select voice for traffic that is especially sensitive to jitter. Use this priority
to reduce latency for improved voice quality.
• Select video for traffic which has some tolerance for jitter but needs to be
prioritized over other data traffic.
• Select best effort for traffic from applications or devices that lack QoS
capabilities. Use best effort priority for traffic that is less sensitive to
latency, but is affected by long delays, such as Internet surfing.
• Select background for non-critical traffic such as bulk transfers and print
jobs that are allowed but that should not affect other applications and
users. Use background priority for applications that do not have strict
latency and throughput requirements.
Note: When you configure an SSID profile's QoS settings, the
ZyXEL Device applies the same QoS setting to all of the
profile's traffic.
Turn on layer-2 isolation to block wireless clients associated with this SSID
from communicating with other wireless clients, APs, computers or routers in
the network except for the ones with MAC addresses that you list in the layer-
2 isolation table.
When you
Note: When you enable layer-2 isolation, the Enable Intra-BSS
Traffic check box in the WIRELESS > Wireless screen
is automatically cleared (intra-BSS traffic is blocked). Go
to the WIRELESS > Wireless screen and re-select the
Enable Intra-BSS Traffic check box if you want to allow
intra-BSS traffic.
Select Enable from the drop down list box to activate MAC address filtering.
Select Enable from the drop down list box to have the ZyXEL Device
broadcast this SSID in a response that it transmits after receiving a probe.
This means a wireless client scanning for an AP can find this SSID.
Select Disable to have the ZyXEL Device hide this SSID in the responses
that it transmits after receiving probes. This means a wireless client scanning
for an AP cannot find this SSID.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
for more information.
for more information.
G-3000 Series User's Guide
Section 7.10 on