Remote Management Setup; Figure 184 Menu 24.11 Remote Management Control; Table 90 Menu 24.11 Remote Management Control - ZyXEL Communications G-3000 User Manual

26.3.4 Remote Management Setup

Remote management setup is for managing Telnet, FTP and Web services. You can customize
the service port, access interface and the secured client IP address to enhance security and
flexibility.
You can manage your ZyXEL Device from a remote location via:
Internet (WLAN only), the LAN only, All (LAN and WLAN) or Disable (neither).
If you enable remote management of a service, but have applied a filter to
block the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown
next)

Figure 184 Menu 24.11 Remote Management Control

TELNET Server:
FTP Server:
HTTPS Server:
HTTP Server:
SNMP Service:
The following table describes the fields in this menu.

Table 90 Menu 24.11 Remote Management Control

FIELD
TELNET Server:
FTP Server:
HTTPS Server:
HTTP Server:
SNMP Service:
Port
Access
G-3000 Series User's Guide
Chapter 26 System Maintenance and Information
Menu 24.11 - Remote Management Control
Port = 23
Secure Client IP = 0.0.0.0
Port = 21
Secure Client IP = 0.0.0.0
Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443
Secure Client IP = 0.0.0.0
Port = 80
Secure Client IP = 0.0.0.0
Port = 161
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Each of these read-only labels denotes a server or service that you may use to
remotely manage the ZyXEL Device.
This field shows the port number for the remote management service. You can
change the port number for a service if needed, but you must use the same
port number to use that service for remote management.
Select the access interface (if any) by pressing the [SPACE BAR]. Choices
are: LAN only, WAN only, All or Disable. The default is LAN only.
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL
253