Second Rx Vlan Setup Example; Figure 116 Second Rx Vlan Id Example - ZyXEL Communications G-3000 User Manual

Figure 116 Second Rx VLAN ID Example

Packets sent from the server S back to the switch are tagged with a VLAN ID (incoming
VLAN ID). These incoming VLAN packets are forwarded to the ZyXEL Device. The ZyXEL
Device compares the VLAN ID in the packet header with each SSID's configured VLAN ID
and second Rx VLAN ID settings.
In this example, SSID01's second Rx VLAN ID is set to 2. All incoming packets tagged with
VLAN ID 2 are forwarded to SSID02, and also to SSID01. However, SSID02 has no second
Rx VLAN ID configured, and the ZyXEL Device forwards only packets tagged with VLAN
ID 2 to it.

15.2.4.1 Second Rx VLAN Setup Example

The following steps show you how to configure a VLAN ID and second Rx VLAN ID for a
third SSID (SSID03) on the ZyXEL Device.
This example has the ZyXEL Device tag outgoing packets from clients in SSID03 with a
VLAN ID of 3, and forward incoming packets with a VLAN ID of 3 or 4 to SSID03.
1 Log into the Web Configurator.
2 Click WIRELESS > SSID.
3 Select the radio button for the SSID profile you want to configure (SSID03 in this
example) and click Edit.
4 Select the SSID profile you want to configure (SSID03 in this example), and enter the
VLAN ID number (between 1 and 4094).
5 Enter a Second Rx VLAN ID. The following screen shows SSID03 tagged with a
VLAN ID of 3 and a Second Rx VLAN ID of 4. Click Apply.
G-3000 Series User's Guide
Chapter 15 VLAN
187