Configuring Layer-2 Isolation; Figure 59 Layer-2 Isolation Configuration Screen - ZyXEL Communications G-3000 User Manual

Chapter 9 Other Wireless Configuration
MAC addresses that are not listed in the Allow devices with these MAC addresses table are
blocked from communicating with the ZyXEL Device's wireless clients except for broadcast
packets. Layer-2 isolation does not check the traffic between wireless clients that are
associated with the same AP. Intra-BSS Traffic allows wireless clients associated with the
same AP to communicate with each other.

9.2 Configuring Layer-2 Isolation

If layer-2 isolation is enabled, you need to know the MAC addresses of the wireless clients,
APs, computers or routers that you want to allow to communicate with the ZyXEL Device's
wireless clients.
To configure layer-2 isolation, click WIRELESS > Layer-2 Isolation. The screen appears as
shown next.

Figure 59 Layer-2 Isolation Configuration Screen

116
G-3000 Series User's Guide