Remote Management; Chapter 30 Remote Management; Overview; The Remote Mgmt Screen - ZyXEL Communications VMG3926-B10A User Manual

30.1 Overview

Remote management controls through which interface(s), which services can access the VMG.
Note: The VMG is managed using the Web Configurator.

30.2 The Remote MGMT Screen

Use this screen to configure through which interface(s), which services can access the VMG. You
can also specify the port numbers the services must use to connect to the VMG. Click Maintenance
> Remote MGMT to open the following screen.
Figure 141 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 111 Maintenance > Remote MGMT
LABEL
WAN Interface
used for
services
service
LAN/WLAN
WAN
Port
DESCRIPTION
Select Any_WAN to have the VMG automatically activate the remote management service
when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the VMG activate
the remote management service when the selected WAN connections are up.
This is the service you may use to access the VMG.
Select the Enable check box for the corresponding services that you want to allow access to
the VMG from the LAN/WLAN.
Select the Enable check box for the corresponding services that you want to allow access to
the VMG from all WAN connections.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
VMG3926-B10A User's Guide
241
C
HAPTER

Remote Management

3 0