Remote Management Screens; Remote Management Overview; Remote Management Limitations; System Timeout - ZyXEL Communications NWA-3500 User Manual

C
H A P T E R

Remote Management Screens

This chapter provides information on the Remote Management screens.

12.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which of
the ZyXEL Device's interfaces (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:

Table 46 Remote Management Overview

• WLAN
• LAN only
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

12.1.1 Remote Management Limitations

Remote management over LAN or WLAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
3 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.

12.1.2 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling. You can change the timeout period in the System screen
ZyXEL NWA-3500 User's Guide
• ALL (LAN and WLAN)
• Neither (Disable).
12
147