Configuring Layer-2 Isolation; Figure 59 Layer-2 Isolation Application - ZyXEL Communications NWA-3100 User Manual

Chapter 8 Other Wireless Configuration

Figure 59 Layer-2 Isolation Application

MAC addresses that are not listed in the Allow devices with these MAC addresses table are
blocked from communicating with the ZyXEL Device's wireless clients except for broadcast
packets. Layer-2 isolation does not check the traffic between wireless clients that are
associated with the same AP. Intra-BSS Traffic allows wireless clients associated with the
same AP to communicate with each other.

8.2 Configuring Layer-2 Isolation

If layer-2 isolation is enabled, you need to know the MAC address of the wireless client, AP,
computer or router that you want to allow to communicate with the ZyXEL Device's wireless
clients.
To configure layer-2 isolation, click WIRELESS > Layer-2 Isolation. The screen appears as
shown next.
106
ZyXEL NWA-3100 User's Guide