Savin IS200e Operating Instructions Manual page 98

Configuring the Scanner Settings
H H H H
Press [Settings].
The setting screen for "2. Original
Size" appears.
I I I I
Select the original size.
3
• The option that is currently se-
lected is displayed first.
• "*" mark appears along with the
option currently selected.
• Use [↑ ↑ ↑ ↑ ] and [↓ ↓ ↓ ↓ ] to display the
option you want to select.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the Default Print Settings menu.
To select an original size from
preset sizes
A While the preset original size
you want to select is displayed,
press [OK].
This saves the setting you have
selected, and returns to the De-
fault Print Settings menu.
Note
❒ Pressing [Exit] discards the
selected option, and returns
to the Default Print Settings
menu.
88
To set a custom size
A While the option "Custom Size"
is displayed, press [Setting].
The setting screen for "Custom
Size" appears.
B Use the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } } keys to
highlight the item you want to
input, and then use the number
keys to input the value.
Note
❒ To correct the number you
have entered, use the { { { { 1 1 1 1 } } } } and
{ { { { 0 0 0 0 } } } } keys to highlight it, and
then press the { { { { Clear/Stop} } } } key
to clear the number.
❒ You can also use the { { { { #} } } } key
as well as the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } }
keys to move selection.
C Press [OK].
This saves the setting you have
entered, and returns to the De-
fault Print Settings menu.
Note
❒ Pressing [Cancel] discards the
values you have entered, and
returns to the Default Print
Settings menu.
J J J J
Press [↓ ↓ ↓ ↓ Next], and then select an
option for "3. Duplex" in the
same way that you have done in
H H H H
the steps through
I I I I
.