Installing Twain Driver - Savin IS200e Operating Instructions Manual

Configuring the Scanner Settings

Installing TWAIN Driver

Important
❒ Be sure to install the USB TWAIN
driver on your computer first, then
turn on your scanner.
Install the TWAIN driver using Auto
Run.
A A A A
Start Windows, and then insert
3
the supplied CD-ROM labeled
"Scanner Driver(s), Utilities and
Operating Instructions" into the
CD-ROM drive of the client com-
puter.
The CD-ROM Launcher screen ap-
pears.
Reference
If the installer does not start au-
tomatically, see p.112 "Auto
Run Program".
B B B B
Click the key of the TWAIN Driv-
er to be installed.
• Click [TWAIN Driver (for LAN)] to
use network TWAIN scanner.
• Click [TWAIN Driver (for USB)] to
use USB TWAIN scanner.
114
C C C C
The installer of the TWAIN driv-
er starts. Follow the instructions
on the screen.
Note
❒ When the installation is com-
plete, a message to prompt you
to restart the client computer
may appear. In this case, restart
the client computer.
❒ After the installation is com-
plete, the "IS200e (Network)
TWAIN Driver Ver. 4" and
"IS200e (USB) TWAIN Driver
Ver. 4" folders are in the "Pro-
gram" folder on the Start menu
respectively. Help can be dis-
played from here.
❒ Notes on using the network
TWAIN scanner are provided in
"Readme.txt". Be sure to read
them before use.