Table of Contents
Advertisement
Appendix
Cannot communicate with the server.
Check the server status and connec-
tion.
[Exit]
Sending data has failed. Scan with
the same settings and re-send.
[Exit]
Exceeded max. scan pages. To scan
remaining pages as a new job, press
[Exit] then press the Start key.
[Exit]
11
188
Message
Possible Cause and Required Action
• If you specified to perform a Scan to Folder
(SMB) operation, check if the power of the
computer on which the Windows shared
folder exists is turned on.
• If you specified to perform a Send Scan op-
eration using a delivery server, check if the
delivery server is turned on.
• If you specified to perform a [Enter Custom
Send File] operation using the Web Status
Monitor, click [Back] on the Web browser,
enter [Login Password], and then click [Test].
If the message "Connection to the Send File
Path has failed. Confirm the settings." is
displayed, [Send File Path] is not specified
correctly.
• The machine failed to send scanned data
due to a network connection problem. Af-
ter confirming that the network cable is
properly connected, try performing anoth-
er Send Scan operation using the same set-
tings. If the same message appears, there
may be network congestion. Consult your
network administrator.
• Continued scanning and reached the max-
imum scan limit (100 pages). Press [Exit].
The scanned original is sent. The specified
destination and scanning condition set-
tings remain the same even after you have
pressed [Exit]. Place the next original and
press the { { { { Start} } } } key.
Advertisement
Table of Contents
