What You Can Do With The Twain Driver; Functions Of The Twain Driver - Savin IS200e Operating Instructions Manual

What You Can Do with the TWAIN Driver

The following is an introduction to the various functions of the TWAIN driver:
Reference
For more information about these functions or other functions, see TWAIN
driver Help.

Functions of the TWAIN Driver

Functions
Scan Mode Standard/Pho-
to/OCR/Filing, User
saved 100 scan modes
Orientation: Standard 0 deg./Right
90 deg./180 deg./Left
90 deg.
Comb./Series Combine 2 pages to
1/Combine 4 pages to
1/divide to 2 pages/Do
not divide/No combi-
nation or division
256 Colors (in
[Col./ Grad.:])
Endorser User set charac-
ters/Date/Counter
ICM: (in [Color
Matching])
Deskew
Start from Scan-
ner
Preview
SADF
About
You can call out and save the original Scan
Modes.
You can rotate the image to have originals
scanned in correct orientation depending on the
place to set the originals. If you are scanning the
duplex printed originals, set the [Scan Settings:]
as well.
You can divide two-page spread originals to two
individual page images, or combine duplex
printed originals to a simplex one page image.
←
Reduces 24bit colour data to 8bit to make the
data size smaller.
You can add the information mentioned in the
left to the scanned images. You can change the
size and the fonts of the endorser.
←
When you enable ICM, the TWAIN Driver will
match the colour data according to the colour
profile.
←
Detects and corrects the tilt of the text strings.
← Press the { { { { Start} } } } key of the scanner to start scan-
ning the originals.
←
You can confirm the settings you made for the
scanning images before scanning the originals.
←
Scanning starts when you set the originals on the
ADF. When you are scanning the originals which
are apt to be double fed, enable SADF and set the
originals one by one on the ADF.
What You Can Do with the TWAIN Driver
Explanation
10
181