To Start With An Original On The Exposure Glass - Savin IS200e Operating Instructions Manual

Sending Scan File by E-mail
To start with an original on the exposure
glass
A A A A
Confirm that the E-mail Ready
screen is displayed.
When "
Select destination(s).
is displayed, no destination is select-
ed. Select a destination to display
" " on the screen.
Ready
B B B B
Press the { { { { Start} } } } key.
5
Scanning the original on the expo-
sure glass starts.
Note
❒ To interrupt scanning, press the
{ { { { Clear/Stop} } } } key.
After the original is scanned prop-
erly, the message "
original(s) and press the
Start key, or press [Finish]
to complete.
C C C C
Place the next original on the ex-
posure glass, and then press the
{ { { { Start} } } } key.
142
"
AFJ044S
Set the next
" appears.
D D D D
C C C C
Repeat step as necessary.
E E E E
Press [Finish] when all the origi-
nals are scanned.
Note
❒ When "
Show Options after
Each Scan Job
[End of Scan Option] under
[2.Send Scan Settings], a screen
for selecting the next operation
appears after you press [Finish].
When scanning finishes properly,
the e-mail is sent to the e-mail
(SMTP) server. B appears at the
upper right corner of the screen
while the e-mail is sent.
Note
❒ You cannot perform any opera-
tions while B is displayed on
the screen.
❒ Do not turn the power of this
machine off while B is dis-
played on the screen.
B disappears when the e-mail has
been sent to the e-mail (SMTP)
server, and the E-mail standby
screen appears.
" is selected for