Table of Contents
Advertisement
Connecting to a
Local Printer
When you wish to use a local printer at Print Scan, USB connect this
machine with the printer.
Important
❒ You need to resister the printer with WebStatusMonitor before using
Print Scan function. See "Outline to Use Scan to Print" in the Operat-
ing Instructions for the outline of procedures to use the function.
Note
❒ See the manuals that comes with the printer you are going to con-
nect to this machine, for details about connections and setup infor-
mation other than the USB cable.
❒ When you connect only a local printer without connecting the USB
keyboard, set up the USB interface card according to "5 Connecting
the Keyboard".
Connect the bundled USB cable to one of the ports of
the USB interface card.
AFJ048S
Connect the other end of the cable to the USB port of
the printer.
Important
❒ Only one printer is available for printing at Print Scan. If you have
USB connected with multiple printers at the same time, the first printer
that this machine should recognize will be available.
Connecting to a
Network
Important
❒ Use a 100BASE-TX (category 5) or 10BASE-T network cable when
you connect this machine to a network.
Insert the network cable's end to the network interface
connector of this machine.
AFJ202S
Insert the other end of the network cable to an appro-
priate connector of a network device, such as an
Ethernet hub.
Attach the card slot cover that comes with this machine.
Attaching the card slot
cover
Reeve the USB and network cable through the slits of
the card slot cover.
AFJ054S
Align the two prongs of the card slot cover with the
two prong holes located at the upper left and right of
the PC card slot.
AFJ055S
1 .
2 .
Prong holes
Prongs
Insert the prongs to the prong holes, and then push both
sides of the card slot cover until it is secured to the ma-
chine.
AFJ056S
Connecting to a
Power Source
WARNING
• Do not use with a power source with a voltage different from the speci-
fied voltage. Do not use a power outlet with multiple devices plugged
in. These could create the risk of fire or electric shock.
• Avoid the use of an extension cord.
• Do not damage, break, twist or modify the Power Cord. Placing heavy
objects on the cord, pulling on or bending it excessively can damage
the Power Cord, creating the risk of fire or electric shock.
• Never touch or unplug the power plug with wet hands. This can cre-
ate the risk of electric shock.
CAUTION
• When unplugging from an outlet, be sure to grasp the plug when
pulling. Never pull on the cord. This could damage the cord creating
the risk of fire or electrical shock.
Confirm that the power switch is set to off.
Confirm that the lock switch located on the right side
of the machine is set to the "Unlock" position.
AFJ053S
Important
❒ Be sure to set the lock switch to "Unlock". Turning on the power with
the lock switch set to "Lock" could result in failure in scanning or
malfunction of this machine.
Push the power cord plug all the way into the power
connector on this machine.
AFJ059S
Note
❒ Be sure to use the power cord that comes with this machine.
Insert the power plug into the power outlet.
Before turning off the power
Before you turn off the power of this machine, make sure that a standby
screen is displayed on the display panel.
If you turn off the power while the scanner features menu is displayed, all
the settings that you have configured could be discarded, and this ma-
chine could return to its factory default status.
You should also confirm that
is not displayed on the screen, or the
indicator on the front of this machine is not lit, when you turn of the power.
Otherwise, loss of scan data or failure in sending files might occur.
Turning On the
Power
Make sure the power cord is firmly plugged into the
wall outlet.
Open the switch cover and turn on the power switch.
AFJ057S
Copyright ©2004 G422-8600
Printed in China
GB
GB
EN USA
Quick Installation Guide
Advertisement
Table of Contents
