Savin IS200e Operating Instructions Manual page 77

Note
❒ You can select "Off" if you do not plan to update the Address Book or the
destination lists frequently. Selecting "Off" makes this machine react
quickly when you press [E-mail].
❖ ❖ ❖ ❖ Unit of Measure
This item lets you select a unit of measurement that is used when you specify
values for [Custom Size] of [Original Size] setting. You can select between "mm"
and "inch".
❖ ❖ ❖ ❖ sRGB
This item lets you select whether to scan originals with the sRGB Colour
matching function enabled. This function is available only when you select
"Color:Full Color" in [Scan Type] under [Scan Settings].
• When "Off" is selected, the sRGB Colour matching function is disabled.
• When "sRGB 1" is selected, the original's Colour tone is accurately repro-
duced, but the paper's yellowish tone may be reproduced also.
• Selecting "sRGB 2" reduces the paper's yellowish tone.
Note
❒ Selecting "sRGB 1" or "sRGB 2" disables the [Image Density] setting. (⇒
p.79)
❖ ❖ ❖ ❖ End of Scan Option
This item lets you select how this machine behaves after a scanning operation
ends. The option selected for this item applies scanning performed in a Send
Scan (Delivery Server or Send Mail/Send File) operation.
Note
❒ You can perform additional scan operation after a scanning from the expo-
sure glass is finished, regardless of the setting of this item.
❒ When you perform a Print Scan operation, the option selected for this set-
up item does not apply.
• Show Options after Each Scan Job
The screen for selecting the next operation appears on the display panel of
this machine.
When scanning is performed from the ADF
The following screen appears when all the originals in the ADF are
scanned.
• Press [Add] to continue scanning to add scanned data to the current im-
age file.
SendScan Settings
67
3