Configuring The Scanner; Outline To Use Scan To E-Mail - Savin IS200e Operating Instructions Manual

3. Configuring the Scanner

Outline to Use Scan to E-mail

The following overview diagram shows the preparation steps for sending scan
files as e-mail attachments. Note that the underlined steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.42 "Initial Scanner Setup" for
details. This manual covers only the setting procedures that you can perform
using the control panel of this machine. For details about settings this manual
does not cover, see the Web Status Monitor Help. For information about how
to view the Web Status Monitor, see p.90 "Accessing the Scanner"
Configure [1.System Settings] on this ma-
Configure [General Settings] on the Web Status
Configure [2.Send Scan Settings] and [4.Scan
Settings] on this machine or on the Web Status
Configure [Custom Title] settings on the Web
Status Monitor.
Configure [E-mail], register [E-mail Address]
and [Subject] on the Web Status Monitor
Recall the Settings on the Web Status Monitor
chine
Monitor
Monitor
Settings
See p.52 "System Settings"
See the Web Status Monitor Help.
See p.64 "SendScan Settings".
See the Web Status Monitor Help.
See p.94 "Configuring [E-mail Ad-
dress]"
and p.104 "Information to register in
[E-mail Address]"
See the Web Status Monitor Help for
details about [E-mail] and [Subject].
See p.109 "Recalling the Settings" for
details.
33