Table of Contents
Advertisement
E-mail/Send File standby screen
Before performing a Send Scan operation, make sure that the E-mail/Send File
standby screen is displayed on the machine's display panel.
The E-mail/Send File standby screen is displayed as the Send Scan initial screen
when [Select Method] (in [2.Send Scan Settings] under the Scanner Features menu)
is set to "Send File/TWAIN", while the Delivery Server standby screen is dis-
played when [Select Method] is set to "Delivery Server/TWAIN".
• When the message "
first line of the display panel, the machine is standing by for Print Scan. Press
[Exit] to return to the Select Method screen.
• When the message "
panel, the machine is used from a client computer, and scanning is in
progress. Wait until the job now in progress ends.
• When the message "
lect the settings from the PC.
machine is standing by for the network TWAIN. Press [Exit].
If there is no [Exit], the Network TWAIN exclusive standby screen is displayed.
Set [6.Select Method] (in [2.Send Scan Settings] under the Scanner Features menu)
to "Send File/TWAIN", and then restart the machine.
• When a send file path name is displayed at the second line of the screen, the
standby screen for [Enter Custom Send File] is displayed. In this case, press
[PrevMenu].
" and the number of copies are displayed on the
Ready
Connecting with PC...
Connecting with PC... Set original(s) and se-
" is displayed on the display panel, the
Before Sending Scan Data
" is displayed on the display
5
131
Advertisement
Table of Contents
