Sendscan Settings; Information To Set In [Send Scan Settings] - Savin IS200e Operating Instructions Manual

Configuring the Scanner Settings

SendScan Settings

This section describes the setup items contained in the SendScan Settings, and
shows you how to configure the settings in the SendScan Settings menu (which
includes main setup items in the SendScan Settings) using the control panel of
this machine.
Reference
The SendScan Settings menus are available by pressing the { { { { User Tools} } } } key.
For configuration using the SendScan Settings menus, see p.70 "Configuring
3
[Send Scan Settings]".
Note
❒ The items marked with (WSM) on the titles signify that they are configured
on the website at WebStatusMonitor.

Information to Set in [Send Scan Settings]

❖ ❖ ❖ ❖ Send File/TWAIN Priority
This item lets you select which of the functions of this machine has priority,
when you use this machine. You can select from the following two options.
• TWAIN
With this option, the TWAIN standby screen is displayed as the Send Scan
initial screen. This means that the machine stands by for receiving a scan-
ning command from a client computer. While the TWAIN standby screen
is displayed, press [Exit] to use the Delivery Server function or the Send
Mail/Send File function (except for performing a Custom Send File oper-
ation).
• Send File
With this option, the Delivery Server standby screen or the E-mail/Send
File standby screen is displayed as the Send Scan initial screen. While ei-
ther of these screens is displayed, you can use this machine as a TWAIN
scanner or perform a Custom Send File operation from a client computer,
whenever no operation is performed on this machine.
Note
❒ When you set "6. Select Method" to "TWAIN", this setup item is dimmed
and cannot be configured.
❖ ❖ ❖ ❖ TWAIN Standby Time
This item lets you specify the time after which this machine stands by for a
network TWAIN command (or a [Enter Custom Send File] command), from the
last operation of the control panel of this machine. When you set this item to
"Off", this machine always stands by for these commands. When you set this
item to "On", you can set the time within the range of 3 to 30 seconds in 1-
second increments.
64