Savin IS200e Operating Instructions Manual page 178

Printing Scanned Image Files
To recall a registered print
settings
A Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [User 1], [User 2] or
[User 3] on the screen, and then
press [OK].
This returns to the Print Scan
Ready screen, and the corre-
sponding print settings are dis-
played on the third line of the
screen.
To configure print settings
manually
A Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [Manual] on the
screen, and then press [Set-
tings].
The first page of the Print Set-
tings screen ( Print Settings 1/2)
is displayed.
B Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight the setup items you
want to change, and then press
8
[Settings].
Reference
See p.85 "Information to Reg-
ister in [Print Settings]" for
details about each of the set-
up items.
C Highlight the option you want
to select by using the { { { { 1 1 1 1 } } } } or
{ { { { 0 0 0 0 } } } } keys (and [↓ ↓ ↓ ↓ Next] or
[↑ ↑ ↑ ↑ Prev.] if necessary), and then
press [OK].
168
Note
❒ Pressing [Cancel] discards the
selected option, and returns
to the previous screen.
❒ When you select [Custom
Size], use the number keys to
enter the dimensions of the
scan area (width and height).
D Repeat steps B B B B and C C C C as nec-
essary.
When you are finished, make
sure that the first page of the
Print Settings screen (Print Set-
tings 1/2) is displayed.
E Press [↓ ↓ ↓ ↓ Next].
The second page of the Print
Settings screen (Print Settings
2/2) is displayed.
F Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight the setup items you
want to change, and then press
[Settings].
Note
❒ If you change the settings in
[Enlarge], [Reduce] and [Create
Margin], only the latest setting
that you have selected within
all of these setup items ap-
plies.