Placing The Original On The Exposure Glass - Savin IS200e Operating Instructions Manual

Setting Originals
Placing the Original on the
Exposure Glass
Important
❒ Be careful not to pinch your fingers
when closing the ADF.
❒ To activate the auto detection of an
original, place the original after
this machine starts up.
A A A A
Lift the ADF.
4
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
124
B B B B
With the side to be scanned facing
down, place the original on the
exposure glass, and align it with
the home position and scale.
Important
❒ Do not press down on the expo-
sure glass. Strong pressure on
the exposure glass could cause
it to break.
A When the original layout is por-
trait:
AFJ006S
B
When the original layout is
landscape:
When a document is set in this
direction, it is generally neces-
sary to change the document
setting direction at the point of
transmission. ⇒ p.121 "Original
Orientation"
C C C C
Gently lower the ADF.
AFJ049S
ADG015S