Connecting To A Network - Savin IS200e Operating Instructions Manual

Setting Up the Scanner

Connecting to a Network

This section explains how to connect
this machine to a network.
Important
❒ Use a 100BASE-TX (category 5) or
2
10BASE-T network cable when
you connect this machine to a net-
work.
A A A A
Insert the network cable's end to
the network interface connector
of this machine.
B B B B
Insert the other end of the net-
work cable to an appropriate con-
nector of a network device, such
as an Ethernet hub.
28
AFJ202S