Outline To Use Scan To Folder - Savin IS200e Operating Instructions Manual

Outline to Use Scan to Folder

The following overview diagram shows the preparation steps for sending scan
files to shared folders of Windows using SMB protocol. Note that the underlined
steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.42 "Initial Scanner Setup" for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.90 "Accessing the Scanner".
Create a shared folder on a Windows computer See Windows Help.
Configure [1.System Settings] on this machine See p.52 "System Settings"
Configure [General Settings] on the Web Status
Configure [2.SendScan Settings] and [4.Scan
Settings] on this machine or on the Web Status
Configure [Custom Title] settings on the Web
Status Monitor.
Configure [Send File], register [Send File Path]
*1
and [File Name] on the Web Status Monitor
Recall the Settings on the Web Status Monitor
*1
This setting becomes essential if you want to perform Scan to Folder (SMB) operation
from this machine. When you perform [Enter Custom Send File] operation using the
Web Status Monitor, it is not necessary to register [Send File Path] in advance.
Monitor
Monitor
Outline to Use Scan to Folder
See the Web Status Monitor Help.
See p.64 "SendScan Settings".
See the Web Status Monitor Help.
See p.99 "Information to register in
[Send File Path]"
See the Web Status Monitor Help for
details about [Send File] and [File Name].
See p.109 "Recalling the Settings" for
details.
3
35