Selecting A File Name - Savin IS200e Operating Instructions Manual

Sending Scan File by Scan to Folder
Note
❒ You can select the title under
which each of the registered
destinations is assigned in
[Configuration] → [File Send
Settings] → [Send File Path] →
[Assign Title] on the Web Sta-
tus Monitor.
C Highlight the shared folder
name you want to select, and
then press [Select].
This selects the check box next
to the folder name.
To recall all available
6
destinations
A Press the { { { { ./*} } } } (Title) key.
List of titles appears on the
screen.
B Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [All], and then press
[OK].
F F F F
Press [OK].
The message "
code for destination.
G G G G
Enter the protection code using
the number keys.
148
Enter protection
" appears.
Note
❒ Enter the four- through eight-
digit number that is specified in
[Configuration] → [File Send Set-
tings] → [Send File Path] → [Pro-
tected Password] on the Web
Status Monitor.
H H H H
Press [OK].
This returns to the screen that was
displayed in step
Note
❒ When you do not specify a file
name, press [OK] here. The E-
mail/Send File standby screen
is displayed, and the shared
folder name that you have se-
lected appears at the second line
of the screen.

Selecting a File Name

You can specify a file name (actually a
prefix string for a file name) for the
scanned file to be sent to the shared
folder. When you do not specify a file
name, the default file name "DOC" is
used automatically.
A A A A
While the E-mail/Send File stand-
by screen is displayed, press
[Dest.].
The screen for selecting destina-
tions appears.
Note
❒ If this screen is already dis-
played, you can skip this step.
❒ If you do not specify a file name,
you can skip this step.
C
.