Savin IS200e Operating Instructions Manual page 64

Configuring the Scanner Settings
Note
❒ When you want to set no limitation of access to this machine, leave these
settings as their default values.
❒ When an IP address of a client computer falls within the logical products
of the access control entry and the access mask entry, the client computer
is granted its access to this machine.
❒ For example, a client computer that has an IP address within the range
shown under "Access-enabled IP address" column in the following table
has right to access this machine, in accordance with the entry of the access
mask to the left, when you set the access control to 192.168.15.18. In the fol-
3
lowing table, "xxx" means any value is available.
000.000.000.000
255.255.000.000
255.255.240.000
255.255.255.000
255.255.255.240
255.255.255.255
❖ ❖ ❖ ❖ Network Boot
Use this item to select whether you use this machine on a DHCP environment
or not. Set this item to "NONE" when a fixed IP address is assigned to this
machine on the network you use. Set this item to "DHCP" when you use this
machine on a DHCP environment.
Note
❒ If you plan to use delivery server function, assign an IP address of this ma-
chine statistically, even when you use this machine on a DHCP environ-
ment. You still have to select "DHCP" for [Network Boot], and do not enter
any value to the following setup items: [IP Address], [Subnet Mask], [Default
Gateway Address].
❒ After you have changed the setting of this item, turn off the power and
then back on to activate the change.
❖ ❖ ❖ ❖ DNS Server 1 IP Address (WSM)
Specify the IP address of the primary DNS server on the network you use this
machine, in the form of xxx.xxx.xxx.xxx (xxx:0 through 255).
Note
❒ This setting can only be configured using the Web Status Monitor.
54
Access mask entry Access-enabled IP address
xxx.xxx.xxx.xxx
192.168.xxx.xxx
192.168.0.xxx
∼192.168.15.xxx
192.168.15.xxx
192.168.15.16
∼192.168.15.31
192.168.15.18