Sending A Scanned File To A Registered Shared Folder; Procedure Breakdown - Savin IS200e Operating Instructions Manual

Sending Scan File by Scan to Folder
Sending a Scanned File to a Registered
Shared Folder
By using the control panel of this machine, you can send a scanned file to a Win-
dows shared folder that is registered to this machine.

Procedure Breakdown

The following overview diagram shows the flow of the steps for sending a
scanned file to a Windows shared folder that is registered to this machine. Note
that the underlined steps are essential.
Note
❒ Some of the steps such as making scan settings are identical to those ex-
plained under "Sending Scan Files by E-mail". See the relevant pages shown
to the right of the following overview diagram.
6
Place originals in the ADF or on the exposure glass.
Confirm the transmission results by using the Web Sta-
146
Select a destination folder.
Select a file name.
Make scan settings.
Press the { { { { Start} } } } key.
tus Monitor.
⇒ p.130 "Before Sending Scan
Data"
⇒ p.147 "Selecting a Shared
Folder"
⇒ p.148 "Selecting a File
Name"
(You can skip this process if you
do not specify a file name.)
⇒ p.138 "Making Scan Set-
tings"
⇒ p.141 "Performing Scan Op-
eration"
⇒ p.143 "Checking Transmis-
sion Results"