Table of Contents
Advertisement
G Highlight the option you want
to select by using the { { { { 1 1 1 1 } } } } or
{ { { { 0 0 0 0 } } } } keys, and then press [OK].
Note
❒ While the setting screen for
[Enlarge] or [Reduce] is dis-
played, highlighting one of
the preset ratio displays pairs
of "original size → copy pa-
per size" on the third line of
the screen.
H If you want to set a custom ra-
tio for [Enlarge] or [Reduce],
highlight the nearest preset ra-
tio, press [Zoom], and then use
the number keys (or [-] and [+] )
to specify the ratio.
I Press [OK].
This saves the ratio you have
entered, and returns to the sec-
ond page of the Print Settings
screen (Print Settings 2/2).
Note
❒ Pressing [Cancel] discards the
setting you have entered,
and returns to the previous
screen.
J When you are finished, press
[Exit].
This returns to the Print Settings
screen.
K Press [OK].
This returns to the Print Scan
Ready screen, and the print set-
tings are displayed on the third
line of the screen.
Confirming the Print Settings
You can confirm the current print set-
tings, or the print settings that you
have registered to [Default], [User 1],
[User 2] or [User 3].
Note
❒ You can confirm the [Default] set-
tings by selecting [Manual] in step B
below, unless you configure the
print settings manually. After you
have manually configured the
print settings, selecting [Manual]
displays the current settings.
A A A A
While the Print Scan Ready
screen is displayed, press [Set-
tings].
The Print Settings screen is dis-
played.
B B B B
Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [Manual], [User 1], [User 2] or
[User 3] on the screen, and then
press [Status].
The status screen of your selection
appears.
C C C C
Use [↓ ↓ ↓ ↓ Next] and [↑ ↑ ↑ ↑ Prev.] to display
the setting of the setup item you
want to confirm.
D D D D
When you are finished, press [Ex-
it].
Printing Scan Data
169
8
Advertisement
Table of Contents
