Table of Contents
Advertisement
2. Getting Started
Connecting the Machine
This section describes connecting the machine to a computer and a telephone line.
Connecting with a Computer Using a USB Cable
• USB 2.0 interface cable is not supplied. Obtain a USB cable that is correct for the computer you
are using.
• USB connection with a Macintosh is only possible via the computer's standard USB port.
1.
Connect the square-shaped connector of the USB 2.0 cable to the USB port.
2.
Connect the opposite end's flat connector to your computer's USB interface or USB hub.
• For details about installing printer drivers for USB connection, see the instructions provided on the
driver CD-ROM.
Connecting with a Network Cable
Follow the procedure below to connect the machine to a computer through a network.
Prepare the hub and other network devices before connecting the 10BASE-T or 100BASE-TX cable to
the machine's Ethernet port.
• Do not connect the Ethernet port of the machine to a network that may supply excess voltage,
such as a telephone line. Doing so may result in fire or electric shock
66
CMF029
Advertisement
Table of Contents
