Debug Spanning-Tree Bpdu-Opt - Cisco ME 3400 Command Reference Manual

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug spanning-tree bpdu-opt

Use the debug spanning-tree bpdu-opt privileged EXEC command to enable debugging of optimized
spanning-tree bridge protocol data units (BPDUs) handling. Use the no form of this command to disable
debugging.
Syntax Description
detail
packet
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines The undebug spanning-tree bpdu-opt command is the same as the no debug spanning-tree bpdu-opt
command.
Related Commands Command
show debugging
show spanning-tree
OL-9640-07
debug spanning-tree bpdu-opt [detail | packet]
no debug spanning-tree bpdu-opt [detail | packet]
(Optional) Display detailed optimized BPDU-handling debug messages.
(Optional) Display packet-level optimized BPDU-handling debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays spanning-tree state information.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug spanning-tree bpdu-opt
B-69