Show Idprom - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show idprom

Use the show idprom user EXEC command to display the IDPROM information for a Gigabit Ethernet
interface.
Syntax Description interface interface-id
detail
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)EX
Usage Guidelines This command applies only to Gigabit Ethernet interfaces and displays information about SFPs inserted
in the SFP module slot.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show idprom interface command for a Gigabit Ethernet interface:
Switch# show idprom interface gigabitethernet0/1
General SFP Information
-----------------------------------------------
Identifier
Connector
Transceiver
Encoding
BR_Nominal
Vendor Name
Vendor Part Number
Vendor Revision
Vendor Serial Number
-----------------------------------------------
Other Information
-------------------------------------------------------
Port asic num
Port asic port num
XCVR init completed
OL-9640-07
show idprom {interface interface-id} [detail] [ | {begin | exclude | include} expression]
Display the IDPROM information for the specified Gigabit Ethernet
interface.
(Optional) Display detailed IDPROM information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 0x03
: 0x07
: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
: 0x02
: 0x01
: CISCO-NEC
: OD-BP1511-23SL2
: 0x30 0x30 0x30 0x31
: NEC08440067
: 0
: 0
: 1
Cisco ME 3400 Ethernet Access Switch Command Reference
show idprom
2-397