Link State Track - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

link state track

Use the link state track user EXEC command to enable a link-state group. Use the no form of this
command to disable a link-state group.
This command is supported only when the switch is running the metro access or metro IP access image.
Syntax Description number
Defaults Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History Release
12.2(25)SEG
Usage Guidelines Use the link state track global configuration command to enable a link-state group.
Examples
This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state group
show link state group
show running-config
OL-9640-07
link state track [number]
no link state track [number]
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the link-state group information.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
(Optional) Specify the link-state group number. The group number can
be 1 to 2. The default is 1.
Cisco ME 3400 Ethernet Access Switch Command Reference
link state track
2-203