Cisco ME 3400 Command Reference Manual page 352

sdm prefer
Table 2-5
Resource
•
IPv6 multicast groups
Total IPv6 unicast routes:
•
•
IPv4 policy-based routing ACEs
IPv4 or MAC QoS ACEs (total)
IPv4 or MAC security ACEs (total)
IPv6 policy-based routing ACEs
IPv6 QoS ACEs
IPv6 security ACEs
1. IPv6 policy-based routing is not supported.
Examples
This example shows how to configure the layer-2 template on a switch:
Switch(config)# sdm prefer layer-2
Switch(config)# exit
Switch# reload
This is an example of an output display when you have changed the template to the layer-2 template and
have not reloaded the switch:
Switch# show sdm prefer
The current template is "default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
On next reload, template will be "layer-2" template.
You can verify your settings by entering the show sdm prefer privileged EXEC command.
Related Commands Command
show sdm prefer
Cisco ME 3400 Ethernet Access Switch Command Reference
2-326
Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates (continued)
Indirect IPv4 routes
Directly connected IPv6 addresses
Indirect IPv6 unicast routes
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
Description
Displays the current SDM template in use or displays the templates that can
be used, with the approximate resource allocation per feature.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
IPv4-and-IPv6
Default
1 K
1 K
3 K
2 K
1 K
0
0.75 K
1 K
1
0
0.5 K
0.5 K
IPv4-and-IPv6
Routing
1.25 K
1 K
2.75 K
1.5 K
1.25 K
0.25 K
0.75 K
0.5 K
0.25 K
0.5 K
0.5 K
5K
1K
9K
5K
4K
0.5K
0.5K
1K
IPv4-and-IPv6
VLAN
0
1 K
0
0
0
0
0.75 K
1K
0
0.5 K
0.5 K
OL-9640-07