Debug Sw-Vlan - Cisco ME 3400 Command Reference Manual

debug sw-vlan

debug sw-vlan
Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.
Use the no form of this command to disable debugging.
Syntax Description badpmcookies
cfg-vlan {bootup | cli}
events
ifs
management
notification
packets
registries
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines
The undebug sw-vlan command is the same as the no debug sw-vlan command.
Related Commands Command
show debugging
show vlan
Cisco ME 3400 Ethernet Access Switch Command Reference
B-74
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | notification
| packets | registries}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management |
notification | packets | registries}
Display debug messages for VLAN manager incidents of bad port manager
cookies.
Display config-vlan debug messages. The keywords have these meanings:
•
•
Display debug messages for VLAN manager events.
See the
Display debug messages for VLAN manager management of internal
VLANs.
See the
Display debug messages for packet handling and encapsulation processes.
Display debug messages for VLAN manager registries.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
bootup—Display messages when the switch is booting up.
cli—Display messages when the command-line interface (CLI) is in
config-vlan mode.
debug sw-vlan ifs command.
debug sw-vlan notification command.
OL-9640-07