Cisco ME 3400 Command Reference Manual page 653

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples This example sets the aging time as 2 hours for absolute aging for all the secure addresses on the port.
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# switchport port-security aging time 120
This example sets the aging time as 2 minutes for inactivity aging type with aging enabled for configured
secure addresses on the port.
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# switchport port-security aging time 2
Switch(config-if)# switchport port-security aging type inactivity
Switch(config-if)# switchport port-security aging static
This example shows how to disable aging for configured secure addresses.
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# no switchport port-security aging static
Related Commands Command
show port-security
switchport port-security
OL-9640-07
Description
Displays the port security settings defined for the port.
Enables port security on a port, restricts the use of the port to a
user-defined group of stations, and configures secure MAC addresses.
Cisco ME 3400 Ethernet Access Switch Command Reference
switchport port-security aging
2-627