Cisco ME 3400 Command Reference Manual page 130

ethernet oam remote-failure
For documentation for the CFM and Ethernet OAM commands, see this URL:
http://www.cisco.com/en/US/products/ps6922/products_command_reference_book09186a0080699104
.html
Examples
This example shows how to configure an Ethernet OAM template for remote-failure indication when an
unrecoverable error has occurred and how to apply it to an interface:
Switch(config)# template oam1
Switch(config-template)# ethernet oam remote-failure dying-gasp action error-disable
interface
Switch(config-template)# exit
Switch(config)# interface gigabitethernet 0/1
Switch(config-if)# source template oam1
Switch(config-if)# exit
This example shows how to configure an Ethernet OAM remote-failure indication on one interface for
unrecoverable errors:
Switch(config)# interface gigabitethernet 0/1
Switch(config-if)# ethernet oam remote-failure dying-gasp action error-disable interface
Switch(config-if)# exit
Related Commands Command
show ethernet oam
status [interface
interface-id]
Cisco ME 3400 Ethernet Access Switch Command Reference
2-104
Chapter 2
Description
Displays configured Ethernet OAM remote failure conditions on all
interfaces or on the specified interface.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07