Show Parser Macro - Cisco ME 3400 Command Reference Manual

show parser macro

show parser macro
Use the show parser macro user EXEC command to display the parameters for all configured macros
or for one macro on the switch.
Syntax Description brief
description [interface
interface-id]
name macro-name
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is a partial output example from the show parser macro command:
Switch# show parser macro
Total number of macros = 2
--------------------------------------------------------------
Macro name : sample-macro1
Macro type : customizable
duplex full
speed auto
mdix auto
--------------------------------------------------------------
Macro name : test1
Macro type : customizable
no shutdown
flowcontrol receive on
speed 100
--------------------------------------------------------------
Cisco ME 3400 Ethernet Access Switch Command Reference
2-492
show parser macro [{brief | description [interface interface-id] | name macro-name}] [ | {begin
| exclude | include} expression]
(Optional) Display the name of each macro.
(Optional) Display all macro descriptions or the description of a specific
interface.
(Optional) Display information about a single macro identified by the macro
name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07