Show Mvr - Cisco ME 3400 Command Reference Manual

show mvr

show mvr
Use the show mvr privileged EXEC command without keywords to display the current Multicast VLAN
Registration (MVR) global parameter values, including whether or not MVR is enabled, the MVR
multicast VLAN, the maximum query response time, the number of multicast groups, and the MVR
mode (dynamic or compatible).
Syntax Description | begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mvr command:
Switch# show mvr
MVR Running: TRUE
MVR multicast VLAN: 1
MVR Max Multicast Groups: 256
MVR Current multicast groups: 0
MVR Global query response time: 5 (tenths of sec)
MVR Mode: compatible
In the preceding display, the maximum number of multicast groups is fixed at 256. The MVR mode is
either compatible (for interoperability with Catalyst 2900 XL and Catalyst 3500 XL switches) or
dynamic (where operation is consistent with IGMP snooping operation and dynamic MVR membership
on source ports is supported).
Cisco ME 3400 Ethernet Access Switch Command Reference
2-484
show mvr [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07