Ip Igmp Snooping Tcn - Cisco ME 3400 Command Reference Manual

ip igmp snooping tcn

ip igmp snooping tcn
Use the ip igmp snooping tcn global configuration command to configure the Internet Group
Management Protocol (IGMP) Topology Change Notification (TCN) behavior. Use the no form of this
command to return to the default settings.
Syntax Description
flood query count count Specify the number of IGMP general queries for which the multicast traffic
query solicit
Defaults
The TCN flood query count is 2.
The TCN query solicitation is disabled.
Command Modes Global configuration
Command History Release
12.2(25)EX
Usage Guidelines
You can prevent the loss of the multicast traffic that might occur because of a topology change by using
this command. If you set the TCN flood query count to 1 by using the ip igmp snooping tcn flood query
count command, the flooding stops after receiving one general query. If you set the count to 7, the
flooding of multicast traffic due to the TCN event lasts until seven general queries are received. Groups
are relearned based on the general queries received during the TCN event.
Examples This example shows how to specify 7 as the number of IGMP general queries for which the multicast
traffic is flooded:
Switch(config)# no ip igmp snooping tcn flood query count 7
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Related Commands Command
ip igmp snooping
ip igmp snooping tcn flood
show ip igmp snooping
Cisco ME 3400 Ethernet Access Switch Command Reference
2-166
ip igmp snooping tcn {flood query count count | query solicit}
no ip igmp snooping tcn {flood query count | query solicit}
is flooded. The range is 1 to 10.
Send an IGMP leave message (global leave) to speed the process of
recovering from the flood mode caused during a TCN event.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Enables IGMP snooping on the switch or on a VLAN.
Specifies flooding on an interface as the IGMP snooping spanning-tree
TCN behavior.
Displays the IGMP snooping configuration of the switch or the VLAN.
OL-9640-07