Debug Monitor - Cisco ME 3400 Command Reference Manual

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug monitor

Use the debug monitor privileged EXEC command to enable debugging of the Switched Port Analyzer
(SPAN) feature. Use the no form of this command to disable debugging.
Syntax Description
all
errors
idb-update
info
list
notifications
platform
requests
snmp
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines The undebug monitor command is the same as the no debug monitor command.
Related Commands Command
show debugging
show monitor
OL-9640-07
debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
no debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
Display all SPAN debug messages.
Display detailed SPAN error debug messages.
Display SPAN interface description block (IDB) update-trace debug messages.
Display SPAN informational-tracing debug messages.
Display SPAN port and VLAN-list tracing debug messages.
Display SPAN notification debug messages.
Display SPAN platform-tracing debug messages.
Display SPAN request debug messages.
Display SPAN and Simple Network Management Protocol (SNMP) tracing
debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays information about all SPAN and remote SPAN (RSPAN) sessions
on the switch.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug monitor
B-17