Cisco ME 3400 Command Reference Manual page 461

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples This is an example of output from the show ip igmp snooping querier command:
Switch> show ip igmp snooping querier
Vlan
---------------------------------------------------
1
2
This is an example of output from the show ip igmp snooping querier detail command:
Switch> show ip igmp snooping querier detail
Vlan
-------------------------------------------------------------
1
Global IGMP switch querier status
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
Vlan 1:
--------------------------------------------------------
elected querier is 1.1.1.1
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
operational state
operational version
tcn query pending count
Related Commands Command
ip igmp snooping querier
show ip igmp snooping mrouter
OL-9640-07
IP Address IGMP Version
172.20.50.11 v3
172.20.40.20 v2
IP Address IGMP Version
1.1.1.1 v2
: Enabled
: 2
: 0.0.0.0
: 60
: 10
: 120
: 2
: 10
IGMP switch querier status
: Enabled
: 2
: 10.1.1.65
: 60
: 10
: 120
: 2
: 10
: Non-Querier
: 2
: 0
Port
Gi0/1
Router
Port
Fa0/1
on port Fa0/1
Description
Enables and configures the IGMP snooping querier on the switch
or on a VLAN.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
Cisco ME 3400 Ethernet Access Switch Command Reference
show ip igmp snooping querier
2-435