Storage And Transportation Precautions; Installation And Wiring Precautions - Omron SMARTSTEP R7D-AP Series User Manual

!Caution Do not store or install the product in the following places. Doing so may result in
fire, electric shock, or damage to the product.
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified in the
• Locations subject to condensation as the result of severe changes in tempera-
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to shock or vibration.
• Locations subject to exposure to water, oil, or chemicals.
!Caution
Do not touch the Servo Driver radiator, Servo Driver regeneration resistor, or Ser-
vomotor while the power is being supplied or soon after the power is turned OFF.
Doing so may result in a skin burn due to the hot surface.

Storage and Transportation Precautions

!Caution Do not hold the product by the cables or motor shaft while transporting it. Doing so
may result in injury or malfunction.
!Caution Do not place any load exceeding the figure indicated on the product. Doing so
may result in injury or malfunction.

Installation and Wiring Precautions

!Caution Do not step on or place a heavy object on the product. Doing so may result in
injury.
!Caution Do not cover the inlet or outlet ports and prevent any foreign objects from entering
the product. Doing so may result in fire.
!Caution
Be sure to install the product in the correct direction. Not doing so may result in
malfunction.
!Caution
Provide the specified clearances between the Servo Driver and the control panel
or with other devices. Not doing so may result in fire or malfunction.
!Caution Do not apply any strong impact. Doing so may result in malfunction.
!Caution
Be sure to wire correctly and securely. Not doing so may result in motor runaway,
injury, or malfunction.
specifications.
ture.