Omron CP1E CPU UNIT SOFTWARE User Manual page 423

Address
Name
Words Bits
A436 00 to Expansion Unit and
02 Expansion I/O Unit
Error Flags
A437 Number of Connected
Units
A440 Max. Interrupt Task
Processing Time
A441 Interrupt Task with
Max. Processing Time
A442 Total Interrupt Task
Processing Time One
Cycle
A444 Pulse Output 0
Stop Error Code
A445 Pulse Output 1
Stop Error Code
CP1E CPU Unit Software User's Manual(W480)
Function
ON when an error occurs in a
CP-series Expansion Unit or Expan-
sion I/O Unit.
A436.00: 1st Unit
A436.01: 2nd Unit
A436.02: 3rd Unit
A436.03: 4th Unit
A436.04: 5th Unit
A436.05: 6th Unit
Note CP1W-TS002/TS102/AD041/DA0
41/32ER/32ET/32ET1 are each
counted as two Units.
Stores the number of Expansion Units
and Expansion I/O Units connected as
a hexadecimal number.
Note This information is invalid only
when a Too Many I/O Points error
has occurred.
CP1W-TS002/TS102/AD041/DA0
41/32ER/32ET/32ET1 are each
counted as two Units.
Contains the Maximum Interrupt Task
Processing Time in units of 0.1 ms.
Note This value is cleared when PLC
operation begins.
Contains the task number of the inter-
rupt task with the maximum processing
time. Hexadecimal values 8000 to
800F correspond to task numbers 00 to
0F. Bit 15 is turned ON when an inter-
rupt has occurred.
Note This value is cleared when PLC
operation begins.
Contains the Total Interrupt Task Pro-
cessing Time in one cycle in units of
0.1ms.Sets when the value is bigger
than the last one once a cycle by com-
mon processing.
Note This value is cleared when PLC
operation begins. The value is
unstable for CPU Unit version 1.0
or earlier.
If a Pulse Output Stop Error occurs for
pulse output 0, the error code is written
to this word.
If a Pulse Output Stop Error occurs for
pulse output 1, the error code is written
to this word.
Status
after
Settings
mode
change
OFF: No error Retained Cleared
ON: Error
0000 to 0006 hex Retained Cleared
0000 to FFFF hex Cleared Cleared
8000 to 800F hex Cleared Cleared
0000 to FFFF hex Cleared Cleared
Retained Cleared
Retained Cleared
Appendices
Related
Status at Write
flags,
startup timing
settings
Written after
the interrupt
task with the
max. process-
ing time is exe-
cuted.
Written after
the interrupt
task with the
max. process-
ing time is exe-
cuted.
Each cycle A440
• Refreshed
when origin
search
starts.
• Refreshed
when a
pulse output
stop error
occurs.
• Refreshed
when origin
search
starts.
• Refreshed
when a
pulse output
stop error
occurs.
A-69